The main purpose:
The concept of ESG sustainable development continues to ferment around the world. Looking at the world, industry indicators including Apple and Nike have put forward ESG development goals in a big way. Important issues such as green energy, carbon reduction, and environmental protection have become necessary conditions for European and American brands to select suppliers. Through the Eco-GloMo green energy, carbon reduction, and environmental protection double E (EPS+ESG) equation, provide high-temperature PVC polyvinyl chloride or high-temperature impregnation process technology to meet the needs of green energy, carbon reduction, and environmental protection. Listed as CSR and tracked
characteristic:
1. Provide PVC polyvinyl chloride or high-temperature gloves with excellent film-forming properties.
2. The affinity material does not contain Silicone, which is suitable for the production line of gloves used in the semiconductor industry.
3. It has good penetration resistance to many solvents and chemicals, and improves the yield of gloves for the pinhole and film-forming properties of the glove production line.
4. Gloves have excellent needle-puncture resistance, tensile strength and durability.
5. Provide glove production line with energy-saving performance up to 30%(max), saving online organic solvent and wastewater treatment costs up to 10%(max), and carbon emission up to 20%(max).
6. Retaining carbon rights and recyclability of waste is in line with ESG sustainable development.
Nitrilepattern, inspection, medical gloves, household gloves, industrial gloves,PUGloves,pvcglove mold–Multiple models
|
model(size) |
S,M,L |
|
high(Height) |
370,400,420mm |
|
Pockmarked(Texture) |
According to customer requirements |
|
pockmarked location(Texture Area) |
Finger numbness, fingertip numbness, general numbness, palm numbness |
|
physical index Physical and Chemical Indicators |
|
|
water absorption |
1.5% |
|
heat resistance |
250°C |
|
Bulk density |
1.2 g/cm3 |
|
Alkali resistance |
>99% |
|
porosity |
0% |
|
Impact strength |
>400kgf |
user's Guide:
1. Please check the Eco-GloMo Hand Stencil for breakage or obvious cracks before use. Do not use if damaged.
2. Please wear gloves when using to avoid direct contact with Eco-GloMo.
3. Before use, it is recommended to soak the Eco-GloMo hand model in water. It is forbidden to use concentrated nitric acid 68% for soaking and cleaning, so as to enhance the anti-sticking property of the Eco-GloMo hand model.
4. Place the plastic stretch film or other packaging material on the Eco-GloMo hand mold and close the mold tightly.
5. Eco-GloMo prohibits the use of open flames, oil temperature and infrared heat sources to heat the oven, and the oven temperature does not exceed 180°C.
6. Eco-GloMo prohibits the use of concentrated nitric acid 68%. It is recommended to use nitric acid solution (below 1.5% is the most suitable) to clean Eco-GloMo hand molds or use it after scrubbing with clean water.
7. Eco-GloMo uses sodium hydroxide. It is recommended to use sodium hydroxide solution or clean water to clean Eco-GloMo hand molds before use.
8. In order to maintain the service life of Eco-GloMo, please wash and dry it after use. Eco-GloMo has a service life of at least 3 years under the conditions recommended by our company, and the warranty is one year.
The above are the basic instructions for use of the Eco-GloMo hand model. However, different Eco-GloMo hand models have different uses and characteristics. Please read the detailed instructions before use in order to use the Eco-GloMo hand model properly.
English 
繁體中文